Landis Gyr E360 User Manual Jun 2026

You stand before a modern electric meter. It looks digital, serious, and slightly intimidating. This is the , part of the E650 Series 5 family. It’s not just a meter; it’s a data hub that measures energy with high precision.

: A triangle symbol near "NW" means the meter is registered on the communication network; a signal strength icon (Ψ) indicates connection quality. Technical Highlights

This article is based on publicly available documentation from manufacturers and energy providers. Always refer to your specific utility provider's E360 manual for region-specific configurations.

Advanced data encryption, firmware signing, and physical tamper detection. 2. Understanding the Hardware Interface landis gyr e360 user manual

If you move into a property where the power has been switched off, the utility provider will remotely authorize a reconnection. However, for safety reasons, the meter will often require a manual confirmation step on-site before restoring power to the house:

Action: The meter will automatically log this event and notify the utility company. If this happened during an official inspection, the technician will clear the alarm. Unauthorized tampering may result in penalties. 8. Frequently Asked Questions (FAQs) Does the Landis+Gyr E360 have a remote disconnect switch?

: By default, the display shows total energy consumption. Press the browse button to cycle through active tariffs (e.g., day/night rates). You stand before a modern electric meter

By consulting the Landis+Gyr E360 user manual and understanding the device's capabilities, you can ensure a safe setup and leverage the full potential of your smart metering system.

Once wired, replace the terminal cover and apply utility security seals to prevent unauthorized tampering. 7. Troubleshooting and Error Codes

Total Active Energy Import (+A) – Total energy consumed from the grid. It’s not just a meter; it’s a data

An infrared interface used by utility technicians to program the meter or extract data locally via an optical probe.

The P1-port (Client Interface) allows you to connect a home energy management system or a real-time display monitor to monitor electricity consumption. What does it mean if the light flashes faster?

By default, the meter shows total energy consumption. However, you can use the to cycle through different readings, such as day/night tariffs or solar production. Common OBIS Codes for Landis+Gyr E360 1.8.0: Total Energy Consumption (kWh) 1.8.1: Day Energy Consumption (kWh) 1.8.2: Night Energy Consumption (kWh) 2.8.0: Total Energy Produced (e.g., Solar feed-in) 2.7.0: Instantaneous power injection (kW) 0.9.1: Current Time 0.9.2: Current Date

Action: Take note of the exact numbers displayed and call your utility provider immediately. Do not attempt to open the meter. Cause: Cellular or mesh network signal strength is low.