Typical installation for a straight staircase takes a few hours once the rail has been custom‑measured and pre‑cut.
Impact driver, torque wrench (8–25 Nm), digital level, wire strippers, multimeter, 5mm & 6mm hex bits, track alignment tool (ThyssenKrupp part #7024051), 2-person lifting sling.
: For securing heavy-duty fasteners.
Gently slide the chassis onto the rail from the bottom up. Ensure the pinion meshes smoothly with the rack teeth without forcing.
This information is for educational purposes only. Always refer to the official ThyssenKrupp Levant installation manual provided with your specific model. thyssenkrupp levant stair lift installation manual top
Space the brackets evenly. Place one foot on the first tread, one on the top tread, and space intermediate feet no more than 3 steps apart.
This is the core of the keyword The manual splits the rail installation into three phases: Bottom, Middle, and Top. We focus on the top. Typical installation for a straight staircase takes a
Tighten the bolts to the specified torque (typically 25 Nm) to ensure a perfectly seamless transition for the drive gear. Step 3: Positioning and Fastening Brackets
The drive chassis contains the motor, gearbox, main circuit board, and safety gear. Gently slide the chassis onto the rail from the bottom up
The represents a premium, reliable solution for straight staircases. For those searching for the installation instructions, the key takeaway is that safety is paramount: this device must be installed, adjusted, and certified by a qualified ThyssenKrupp technician to ensure compliance with safety regulations (EN 81-40 and A18.1).