Thyssenkrupp Levant Stair Lift Installation Manual __exclusive__ Full Jun 2026
Run the power cable safely along the underside of the rail using cable clips to prevent it from tangling with the moving carriage.
Before beginning the installation, it is crucial to review the safety protocols outlined in the Levant manual The Levant stair lift Go to product viewer dialog for this item.
: Adjust the position until the lift glides smoothly without obstruction. Post-Installation Troubleshooting
: Run the lift up and down the entire track completely empty to listen for unusual noises or binding. Repeat this test with a test weight to ensure smooth power delivery under load. thyssenkrupp levant stair lift installation manual full
for a straight-rail Levant model (for awareness, not for DIY use). Stair lift installation requires electrical, mechanical, and safety expertise.
: The Levant allows for minor seat height adjustments during installation. Select the preferred height hole on the pillar before anchoring the locking pin.
The installation of a stair lift is a complex process that requires strict adherence to safety procedures. The following steps are a general overview of the process a certified technician would follow, based on ThyssenKrupp's installation manuals for similar models. Run the power cable safely along the underside
For a full installation manual, here are a few steps you can take:
Tighten all bolts securing the rail to the steps. B. Installing the Carriage and Chair
The ThyssenKrupp Levant features several integrated safety mechanisms that must be tested individually before anyone rides the lift. Safety Feature Test Procedure Expected Result Depress the edges of the footrest while driving the lift. The lift must stop immediately. Carriage Shroud Sensors Post-Installation Troubleshooting : Run the lift up and
Fasten the folding footrest assembly to the base of the carriage. Ensure the under-footrest safety pan switches click freely when pressed. Step 5: Electrical Configuration and Charging Strips
The Levant is designed for a clean, discrete fit directly onto your existing stairs. : Straight, single flight of stairs.
The carriage contains the motor, gearbox, main circuit board, and backup batteries.