Remember: A drone is not a toy; it is a robot. Treat the Skyrex with respect, keep this manual bookmarked, and the skies will return stunning footage for years to come.
Your Skyrex controller likely has a three-position switch (Mode 1, 2, 3). Here is what the manual says about each:
| | Key Specifications | Notable Features | | :--- | :--- | :--- | | SkyRex Elite | Dinosaur/Pterosaur design, durable plastic, age 6+ | Auto-flight, inspired by prehistoric creatures, great for kids | | Standard Skyrex | Up to 45 min flight time, infrared control, range 10-15m | LED controls, landing gears, durable structure | | SkyRex Aeroquest | 6-axis gyroscope stabilisation, blue colour | 1-key takeoff/landing/return, auto-hover, looping | | Skyrex AX-5 | 2.4GHz radio control, 120m range, 6 min flight, Li-Po 3.7V 300mAh battery, micro USB charging | 3 speed modes, 360° looping, Headless Mode, HD camera, 2 batteries |
: Embedded in the motor pods to indicate aircraft orientation and diagnostic states. 2. Pre-Flight Preparation Battery Management skyrex drone manual
Here’s what you can typically expect to find when you open your Skyrex drone package:
If you are a beginner, snap the included propeller guards onto the motor housings to protect the blades from minor impacts. Downloading the App
Turn the drone nose-down (vertical) and rotate it 360 degrees clockwise around its vertical axis until the controller beeps again and the lights become solid. Step 3: Gyroscope Calibration Place the drone back on the flat surface. Move both joysticks down and to the left simultaneously. Remember: A drone is not a toy; it is a robot
Do not operate your drone near airports, military facilities, crowded stadiums, or active emergency response areas. Check your local aviation authority app before every flight.
If you need help with a specific part of the setup, let me know:
Point the nose of the drone vertically upward and rotate it 360 degrees around its central axis. The lights will turn solid green, confirming a successful calibration. Gyroscope Calibration Here is what the manual says about each:
Match the letter on the propeller blade to the letter on the drone arm. Place the propeller onto the motor shaft. Secure tightly using the provided screwdriver and screws.
Push both control sticks down and inward (V-shape) to arm the motors. Once the propellers spin, gently push the left stick upward to ascend.
Battery at 15% and drone is far away. Fix: Land immediately. A hero’s walk of shame beats a drone in a neighbor’s pool.