Shell Alvania G3 Data Sheet |link|

Let’s translate those numbers into practical advantages.

: Used in rolling element and plain grease-lubricated bearings across various sectors. Availability and Replacements Shell Gadus S2 V100 3

Users looking for functionally similar greases from other manufacturers may consider the following NLGI 3, lithium‑based general‑purpose greases: shell alvania g3 data sheet

The grade 3 consistency made it stiffer than standard NLGI 2 greases. This property ensured excellent retention in vertical bearings and open housings where softer grease would purge or leak out.

Compatible with most conventional lithium and lithium complex greases. Avoid mixing with incompatible thickeners (e.g., polyurea, clay-based greases) unless thoroughly cleaned. Let’s translate those numbers into practical advantages

| Parameter | Typical Value | Test Method | |-----------|---------------|--------------| | | Smooth, buttery texture | Visual | | Color | Light brown to amber | Visual | | NLGI Consistency Number | 3 | ASTM D217 | | Worked Penetration (60 strokes) | 220 – 250 (0.1 mm) | ASTM D217 | | Dropping Point | ≥ 180°C (356°F) | ASTM D566 / D2265 | | Base Oil Viscosity at 40°C | ~100 – 150 cSt | ASTM D445 | | Base Oil Viscosity at 100°C | ~11 – 15 cSt | ASTM D445 | | Copper Strip Corrosion | 1a (no corrosion) | ASTM D4048 | | Water Washout Resistance (79°C) | ≤ 10% loss | ASTM D1264 | | Roll Stability (100 hours) | ≤ 30 point change | ASTM D1831 | | Oil Separation (100°C, 24h) | ≤ 5% weight loss | ASTM D1742 | | Low Temperature Torque (-20°C) | Start torque: < 1000 g-cm | ASTM D1478 | | Rust Protection (EMCOR) | 0 – 0 (pass) | ASTM D6138 | | 4-Ball Weld Load (scuffing) | ≥ 250 kg | ASTM D2596 |

Shell Alvania G3 is a high-performance, lithium hydroxystearate grease designed for general industrial and automotive applications. Formulated with high-quality mineral base oils and advanced additives, it provides robust protection against corrosion, wear, and water washout. | Parameter | Typical Value | Test Method

Approximately 9.2 mm²/s (cSt) Dropping Point (IP 396): Minimum 180°C (356°F)

The technical values in this article are based on publicly available Shell product documentation as of the publication date. For critical applications, always refer to the current official Shell Alvania G3 data sheet and consult a lubrication engineer. This article is for informational purposes and does not constitute professional engineering advice.