You are trying to find and install the mass production software ( MPTool / ST-Tool ) to restore or format a corrupted, write-protected, or bricked USB flash drive.
Once completed, the box will turn and display OK . If it turns Red , it indicates an error code (e.g., CT-0x1042), usually implying a mismatched firmware file or a physical hardware fault with the NAND memory. Troubleshooting Failure: Entering "Test Mode"
Click the button on the right side of the window. Your PS2251-07 drive should appear in one of the colored status boxes. phison ps225107ps2307 mptool install
This usually means the firmware file is incorrect for your specific NAND flash. Double-check your flash type in ChipGenius.
The "installation" of Phison MPTool is usually a portable extraction process. Follow these steps to get started: 1. Extract the Software You are trying to find and install the
The terminology "Phison MPTool" for the PS2251-07 controller refers to (the production software) combined with Burner (BN) and Firmware (FW) binary files.
: A sequence of hex characters (e.g., AD 3A 18 03 or AD DE 94 A7 ). Double-check your flash type in ChipGenius
Search for or “Phison MPAll v3.xx” (example version: MPALL_F1_7F00_DL07_v503_0C ).