Phison Mpall V5.13.0c __hot__

Click the individual box number of your drive to double-check that the profile settings match.

Plug the drive into a legacy USB 2.0 port on the back of the motherboard. Safety and Best Practices

Do not guess your controller model. You must use a diagnostic tool like or ChipGenius to read the internal hardware specs. Look specifically for the following lines in the report: Controller Part-Number: (e.g., PS2251-07) Flash ID Code: (e.g., AD3A18A3 - Toshiba) 2. Source the Matching Firmware Files Phison Mpall V5.13.0c

Hard-codes an ISO file onto the controller chip so the USB drive registers in Windows as a physical CD-ROM/DVD-ROM drive (ideal for unbrickable bootable toolkits).

Note: If the controller vendor is Silicon Motion (SMI), Alcor, or Genesys, MPALL will not work. Click the individual box number of your drive

Removes stubborn "Disk is Write-Protected" hardware flags.

To extract the exact hardware specifications of your flash drive, download a free hardware diagnostic tool such as or ChipGenius . You must use a diagnostic tool like or

Because MPALL is an industrial factory tool, it does not feature an automated "one-click" repair process. You must manually define your hardware parameters using its built-in configuration compiler.

Phison MPall v5.13.0c – The Go-To Tool for Reviving Dead USB Drives (Updated)

You are likely trying to use a USB 3.0 port. Move the flash drive to a native USB 2.0 port on the back of your motherboard. USB 2.0 ports are significantly more stable during deep ISP cycles. 2. Error Code: 0x1102 (Burner and Flash Mismatch)

Use MPall if: