The MS7869 Ver 10 motherboard is covered by a 3-year limited warranty.
Core i7-4xxx, Core i5-4xxx, Core i3-4xxx, Pentium/Celeron LGA 1150. Highest Recommended Upgrade: Core i7-4790T or i7-4770. Acer Community Key Connector Layout (Ver 1.0)
This guide will walk you through everything you need to know about this classic motherboard, from its detailed specifications and installation process to common troubleshooting tips and upgrade possibilities.
Micro-ATX (24.4 cm x 20.6 cm) Socket: LGA 1150 Chipset: Intel H81 Express ms7869 ver 10 motherboard manual 2021
4-pin ATX 12V connector located near the CPU socket. 🖥️ Rear I/O Panel Ports
If you run into boot loops after hardware changes, try clearing the CMOS by removing the coin-cell battery for 30 seconds.
| Feature | Specification | | :--- | :--- | | | Mini-ITX (17cm x 17cm) | | Socket | AMD FM2+ (FM2b compliant) | | Supported CPUs | AMD A4, A6, A8, A10 (Trinity/Richland, up to 65W TDP) | | Chipset | AMD A78 (Hudson D3) | | Memory | 2 x DDR3 DIMM slots (Max 16GB, 1333/1600 MHz, non-ECC, unbuffered) | | Integrated Graphics | AMD Radeon HD 8000/9000 series (via APU) – VGA, HDMI, DVI outputs | | Expansion Slots | 1 x PCIe x16 (v2.0), 1 x PCIe x1 | | Storage | 4 x SATA 3.0 (6Gb/s), 1 x eSATA (rear panel) | | Rear I/O | PS/2 (keyboard), VGA, DVI, HDMI, 2x USB 3.0, 4x USB 2.0, RJ45, audio jacks (3) | | Audio | Realtek ALC662 (5.1 channel) | The MS7869 Ver 10 motherboard is covered by
Without a manual, connecting the front panel (Power SW, Reset SW, HDD LED, Power LED) can be difficult. The general standard for all motherboards is to look for a block of pins labeled "F_PANEL" or "JFP1". As a general guide, the Power SW pins are often the two pins in the upper-right corner of this block, but this can vary. If you are unsure, connecting just the Power SW is safe to test the system.
Reserved for secondary mechanical Hard Drives (HDD) or Optical Drives (CD/DVD). 🗺️ Header Pinouts and Connectors
Since MSI’s OEM portal is locked for many users, here are the three safe, free methods to get the official document (released initially in 2013, updated in 2015). Acer Community Key Connector Layout (Ver 1
Connecting the case cables to the JFP1 header is the most challenging part of installing this motherboard. The header is located on the bottom right corner of the board. 2 4 6 8 10 [ . . . . . ] [ . . . . ] 1 3 5 7 9 Use code with caution. Pin Number Description Hard Drive Activity LED (HDD_LED) Pin 1 is Positive (+), Pin 3 is Negative (-) 2, 4 Power LED (MSG_LED) Pin 2 is Positive (+), Pin 4 is Negative (-) 5, 7 Reset Switch (RST_SW) Orientation does not matter 6, 8 Power Switch (PWR_SW) Orientation does not matter 9 Leave empty 10 Missing pin for orientation Power Connections
Modern low-power cards like the GTX 1650 or RTX 3050 (6GB) work well, provided your power supply can handle them. ⚠️ Known Compatibility Issues