Which (e.g., Arduino Uno, Mega, ESP32, or PIC) you plan to use?
Connect the VCC pin of the MPU6050 to a +5V or +3.3V power rail, and connect the GND pin to the system ground. Mpu6050 Proteus Library
If you are trying to simulate an MPU6050 to see if your code works, Which (e
specifically formatted for Proteus simulation. The library's core features are designed to make
The library's core features are designed to make simulation powerful and accessible:
Once installed, search for "MPU6050" in the component pick list ( key). Place it on your schematic. The MPU6050 uses the I2Ccap I squared cap C communication protocol, which requires specific wiring: VCC: Connect to a power rail. GND: Connect to the common system ground ( SCL (Serial Clock): Connect to the microcontroller I2Ccap I squared cap C clock pin (e.g., A5 on Arduino Uno). SDA (Serial Data): Connect to the microcontroller I2Ccap I squared cap C data pin (e.g., A4 on Arduino Uno).
void loop() Wire.beginTransmission(MPU6050_ADDR); Wire.write(0x3B); // starting register for ACCEL_XOUT_H Wire.endTransmission(false); Wire.requestFrom(MPU6050_ADDR, 14, true);