Kes Geyser Load Control Timer Manual New =link= | Premium |

By reducing operation time to 2-3 hours a day, significant electricity savings are achieved.

Use the keys on the face panel to cycle through programming levels. LED Indicators: Green: Mains Power is ON. Red: Load (Geyser) is ON.

If you make a mistake or want to disable a specific schedule, press until you navigate to that specific numbered program, then press the Manual button. The time display will change to --:-- , indicating that specific program block is cleared. Understanding the Manual / Override Modes kes geyser load control timer manual new

Locate the button on the face of the unit. Press the button to cycle through the available options. Watch the Blue LED to confirm your selection:

If you need a more specific manual, please tell me the exact model number on the unit. For help with the wiring, Geyser Load Control Timer ISG1201 Guide | PDF - Scribd By reducing operation time to 2-3 hours a

Hold the Override and Program buttons together to verify the Real Time Clock (RTC). The LED for Program 1 will flash, allowing you to set the hours, minutes, and day of the week.

If the current time falls inside an active schedule when you switch to AUTO, toggle the mode to ON first, then switch it to AUTO . If the current time is outside a schedule, toggle to OFF first, then switch to AUTO . Troubleshooting Common Issues The Screen is Completely Blank Red: Load (Geyser) is ON

Managing your home’s energy usage is more critical than ever. The new KES Geyser Load Control Timer (ISG1201)

The ISG1201 and similar load control timers are designed for installation in a distribution board to control your geyser's hot water load.

Allows you to manually trigger a heating cycle if you need hot water immediately, provided it is outside of the restricted peak load state. Backup Power: Features a long-term internal battery

: Permanently OFF, though manual override is still available outside of peak times. Manual Override : Press the "Override"