Gas cylinders - Operational procedures for the safe removal of valves from gas cylinders, Published by AS, 2025-02-28
This standard establishes requirements for the of removing offshore installations. It aims to: Minimize environmental impact during the removal process. iso 25760 pdf
5.4.2 Traveling with a load – The operator shall ensure that the load is stable and secured against falling. The forks shall be positioned under the load as far as possible. The mast shall be tilted backward to stabilize the load. The load shall be carried at the lowest possible height consistent with safe ground clearance, typically 150 mm to 200 mm. The operator shall maintain a clear view of the direction of travel; if the load obstructs forward view, the truck shall be driven in reverse except when ascending a ramp with a load, where forward travel is permitted with the load on the uphill side. Gas cylinders - Operational procedures for the safe
The standard defines three verification levels: The forks shall be positioned under the load
To maintain compliance, your valve removal procedure must cross-reference ISO 25760 with local OSH (Occupational Safety and Health) regulations.
ISO 25760 does not apply to cylinders containing acetylene in solution (due to unique internal structures) or cylinders permanently attached to equipment (e.g., scuba tanks used in backpacks, though similar principles may apply). It also excludes cryogenic vessels.