Harvey Hv3 Water Softener Installation Manual Patched < DELUXE >

The Harvey HV3 requires a three-valve bypass system. This allows you to isolate the water softener for maintenance or moving house without shutting off the main water supply to your entire home. The Three-Valve Bypass Configuration Controls hard water entering the softener.

The system regenerates automatically based on water usage. Troubleshooting Common Installation Issues

The Harvey HV3 water softener installation manual dedicates an entire section to pre-installation planning. Do not skip this page. Here is what you need to confirm: harvey hv3 water softener installation manual

Even the best systems can occasionally encounter problems. Here are common issues and their solutions.

Position the valves so that the softener inlet and outlet are closed, and the bypass valve is open. This allows the main water to resume flowing into the house while you work. 3. Route Hard Water Taps (Optional) The Harvey HV3 requires a three-valve bypass system

The INLET and OUTLET are clearly marked on the control valve. Reversing them will destroy the softener’s internal components.

: Use WRAS-approved high-flow flexible hoses to connect the unit to the plumbing manifold. Step-by-Step Installation Summary Prepare the Supply : Shut off the main water supply and drain the lines. Connect Hoses The system regenerates automatically based on water usage

Install the Inlet Valve on the incoming hard water pipe, the Outlet Valve on the outgoing soft water pipe, and the Bypass Valve bridging the space between them.

Walk through the operation of the bypass system with any other household members so they know how to isolate the softener if needed—for example, if you run out of salt or need to perform maintenance.