Test card readers to ensure they open the panels.

Re-position the units and fix them securely to the floor. 3.3. Levelling and Adjustments

The system will run a self-diagnostic routine. The glass wings will move slowly to find their physical limits and establish homing coordinates. Sensor Alignment Verification

Ensure all electrical components are grounded correctly, following all safety warnings in the manual.

(Flap Leaf) is a high-performance security gate designed for seamless entrance control in corporate, governmental, and public environments. This guide provides a comprehensive overview of the installation process, technical requirements, and operational maintenance based on official documentation from Gunnebo Entrance Control .

For security professionals, installing a SpeedStile FL without thoroughly reading chapters 4 (Mechanical Mounting) and 9 (Electrical Wiring) is a recipe for intermittent faults. By following the manual’s detailed procedures, you guarantee pedestrian flow rates of 45 people per minute, near-zero false alarms, and a service life exceeding a decade.

If installation is delayed, store the units upright in a dry, dust-free environment wrapped in their original protective film. 3. Mechanical Installation

, comprehensive site preparation is necessary. The unit must be installed on a finished, flat, and level floor to ensure the glass panels operate smoothly and align correctly Structural Integrity: