Most users can stick to the "Default" settings. However, if your drive has bad blocks, you may need to enter the (usually password-protected; try leaving it blank or using 123456 ) and select "Scan Level" to a deeper setting to "hide" corrupted storage cells. Step 4: Start the Flashing Process
If you tell me exactly what you want to do (repair a dead drive, change vendor name, make a bootable USB, or recover capacity), I can point you to the right version and steps.
Set to "Low Level Format" if the drive has severe errors. Set to "High Level Format" if you are just trying to clear a write-protection bug.
FirstChip updates its MPTools regularly to support newer batches of flash memory. firstchip fc1179 firmware full
In most cases, the MPTool download comes with a library of firmware files. However, if the tool does not recognize your specific NAND flash
Note: Always download the latest version available, as newer releases include updated firmware firmware libraries that support a wider range of Flash IDs. Step 3: Configuration and Flashing Procedure
You can find these tools on specialized flash drive repair forums (such as or flashboot.ru ). Since these are community-maintained archives, exercise caution with downloads. Most users can stick to the "Default" settings
To successfully flash or repair a drive with this controller, you need to know how it interfaces with storage and software:
The term "firmware full" in the context of FC1179 drives refers to the complete firmware package that the MpTools utility uses to reprogram the controller. Unlike a simple driver update, this process is akin to performing a low-level factory reset on the drive.
The primary software used to fix these drives is the (Mass Production Tool). This utility is designed to communicate directly with the FC1179 controller Go to product viewer dialog for this item. Set to "Low Level Format" if the drive has severe errors
If the drive is completely dead, the controller might be stuck in a bootloop. To force it into "Test Mode": Open the USB casing.
Click the button on the interface panel. When prompted for a password, leave the input field completely blank and click OK . Step 3: Configure Scanning Settings
Warning! Using the MPTool will completely erase all data on the USB drive