The official EVPAD Hong Kong support recommends contacting EVPAD hardware customer service for obtaining the correct firmware files specific to your device model.
(Alternative Method) A formatted FAT32 MicroSD card (8GB–32GB) if you choose the recovery menu method.
Re-download the firmware file making sure it matches the 5S model. Reset button not held down correctly.
Plug the prepared USB flash drive into one of the available USB ports on the side or back of your EVPAD 5S. 2. Navigate to System Settings evpad 5s firmware install download
Plug in the power; the device should automatically detect the firmware and begin the upgrade. Once completed, remove the SD card and restart the box. 3. Reinstalling Apps After Firmware Update
Locate the on the EVPAD 5S (usually labeled or marked as USB-1).
Before beginning the installation process, you must gather the necessary tools and prepare your hardware. Skipping these steps can result in a failed installation or a permanently bricked device. The official EVPAD Hong Kong support recommends contacting
This is the method most users need when troubleshooting a bricked device.
Disclaimer: I am an independent tech writer. Always verify firmware links with your original EVPAD reseller to avoid voiding your warranty.
Keep the EVPAD 5S unplugged from its power adapter. Press and hold the hidden reset button inside the AV port using a paperclip. While holding the button, connect the TV box to your PC using the male-to-male USB cable (use the USB-2 port on the EVPAD). Reset button not held down correctly
Formatting it to FAT32 is mandatory.
Use your EVPAD remote control to navigate down to or Apply update from USB storage .