Eliwell Sb655 C Manual [extra Quality] -

The interface features a 4-digit display and 4 configurable buttons for navigation.

Press to view its current value, use the arrows to adjust it, and press set to save. Critical Parameters to Calibrate Parameter Code Description Recommended Default diF Temperature differential (hysteresis) 2.0 °C / 4.0 °F HSE Maximum limit settable for Setpoint Maximum safe storage limit LSE Minimum limit settable for Setpoint Minimum safe cooling limit dty Defrost type (0 = electrical, 1 = hot gas, 2 = timed air) Based on equipment design dit Interval time between two defrost cycles dEt Defrost endurance timeout (maximum safety limit) 30 minutes Troubleshooting and Error Codes

Access parameter uPL in the main menu, press SET , enter password, and select yES . The configurations are copied over.

Press the button again to confirm and save the new value. Press [ESC] or wait 15 seconds to exit the menu. Activating a Manual Defrost eliwell sb655 c manual

Support for NTC or PTC probes (temperature sensors).

Supports Variable Frequency Drives (VFD) for both compressors and primary water pumps.

| Code | Description | Options | Default | |------|-------------|---------|---------| | | Digital input function | 0=Disabled, 1=Door switch, 2=Ext alarm | 1 | | i2 | Door open action | 0=Comp off, 1=Comp off + alarm | 0 | | id | Door alarm delay | 0 – 255 | 10 | min | The interface features a 4-digit display and 4

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Supports industry-standard protocols including Modbus and Televis for remote monitoring and integration into building management systems. Key Programming & Navigation

The SB655 C uses a "common" system for probes. Terminal 1 and terminal 4 must be connected via a jumper wire if using two probes. This is a common installation mistake. The configurations are copied over

This guide serves as an extensive manual for installing, wiring, programming, and troubleshooting the Eliwell SB655 C controller. Technical Specifications and Dimensions

Fans run continuously, independent of compressor status, stopping only during defrost cycles.

: It is strongly recommended to switch the device off and on after changing configurations to prevent timing malfunctions.

: Press the FNC (function) key to return to the previous level or exit without saving.