Cs-2200 Icom Ic-2200h Programming Software < 2027 >

In the software, select Clone > Read (or similar) to download the current settings.

Turn off the IC-2200H. Plug the cable into the DATA port. Hold down the ‘V/Mhz’ button on the radio face. While holding it, turn on the radio power. The screen will go blank or show "CLONE." This places the radio in programming mode. Now click "Write" in the CS-2200 software.

Obtain the CS-2200 software from a reputable dealer or Icom resource. Install the USB Driver:

Read the entire radio configuration into a .icf (Icom Clone Format) file for backup or duplication. Write settings back to any IC-2200H, ensuring consistent fleet programming. Use the software as a full cloning tool without a separate cloning cable (requires OPC-478 or equivalent USB programming cable). CS-2200 Icom IC-2200H Programming Software

That’s where the comes in. If you want to organize your repeaters and memory channels efficiently, this software is essential. Why Use the CS-2200 Software?

This pulls the factory default firmware profile into the software and prevents format mismatches. Open the CS-2200 software.

The Icom CS-2200 (cloning software) designed specifically for the IC-2200H. In the software, select Clone > Read (or

by hand is a chore. Specialized software offers several advantages: Visual Management

While the official Icom software works, many hams prefer more modern, feature-rich, or cross-platform solutions. The two most prominent alternatives are from and the open-source project CHIRP .

For further assistance with the Icom IC-2200H, the following resources are available: Hold down the ‘V/Mhz’ button on the radio face

Before you can use the CS-2200 software, you must gather the correct hardware components to bridge your PC and your transceiver. 1. The Programming Cable

Limitations and Considerations

Interoperability and alternatives