Caraflo V200 Shower Instructions ((full)) -

: It comes with brass threaded tails and chrome back plates. Ensure the hot supply is connected to the inlet marked "HOT" (or 'H'/red label) and the cold supply to the inlet marked "COLD" (or 'C'/blue label). Hole Centres : Standard fitting requires 45mm hole centres . System Requirements : Operating Pressure : 0.5 to 5 bar. Hot Water Temperature : 55°C–65°C. Cold Water Temperature : Below 25°C. Winterization (Drain-Down)

features a dual-orientation design, allowing it to be installed either . Caraflo V200 Shower Mixer Tap Thermostatic Chrome

Ensure the hot supply line connects to the hot inlet (typically marked with a red indicator). caraflo v200 shower instructions

Supports both horizontal and vertical installations Step 1: Pre-Installation Requirements

Mark the two inlet pipe centers exactly 150mm apart horizontally. : It comes with brass threaded tails and chrome back plates

What specific or pump does your holiday home use?

Insert the drain-down key into the designated drain port located on the underside or base of the valve body. System Requirements : Operating Pressure : 0

The is a thermostatic shower mixer tap primarily used in static holiday homes and caravans since 2013. It is a direct replacement for the older V100 model and is compatible with major manufacturers like Swift, Willerby, and ABI. Installation Instructions Orientation : The

Refit the handle onto the spindle so that the 38°C mark (or safety button alignment) aligns perfectly with the reference mark on the valve body.

Ensure your supply pipes are protruding from the wall at exactly 150mm centers.

Align the V200 valve horizontally or vertically depending on your space.