Open Device Manager on your PC. Look under "Ports (COM & LPT)". If you see a yellow exclamation mark, your cable uses a counterfeit chip. You must roll back the driver to an older version (usually version 3.2.0.0 from 2008) or buy an authentic FTDI cable. "Unsupported Firmware" Warning
Because the UV-10R shares internal architecture with other Baofeng models, it may not always have a dedicated "UV-10R" label in older versions of the software. If you do not see it listed, selecting Baofeng UV-5R or BF-F8HP as the model usually works perfectly. 2. Baofeng Official CPS (Customer Programming Software)
The industry standard for Baofeng radios. It allows you to import frequencies from databases like Repeater Book RadioReference
RT Systems creates commercial-grade radio programming software paired with high-quality proprietary cables. baofeng uv10r programming software top
Access hidden settings, such as turning off the beep, setting backlight timers, and setting "Roger Beeps."
Set to "Tone" or "TSQL" if your local repeater requires a PL privacy tone.
Programming software allows you to:
Their kits usually come with a genuine USB cable that works immediately without the common "counterfeit chip" driver issues found in cheaper cables.
To help narrow down your setup process, could you tell me your (Windows or Mac)? Also, Share public link
Troubleshooting
Select and Model: UV-5R (The UV-10R is compatible with the UV-5R programming structure in most cases).
Frequently suffers from translation issues (Chinese to English); historically difficult to find the correct version for specific firmware iterations; officially supports Windows only.