is your printer showing?
Epson explicitly states that the adjustment program is for “authorized service providers only.” Using it yourself may:
: Essential when replacing the print head, as it allows you to register the new hardware's unique ID with the printer's logic board. Cleaning Cycles Adjustment Program Epson Xp 225
Inside your Epson XP-225 are physical foam pads designed to absorb excess ink during initial setup, print head cleaning cycles, and borderless printing.
If you want to make sure you have everything ready for this process, let me know: is your printer showing
Proceed at your own risk. Back up your system and understand that improper use can permanently brick your XP-225.
This is the crucial step. Look for a section labeled "Waste Ink Pad Counter." You will see a box labeled "Main Pad Counter." Click the "Check" button to verify the current status. You should see a percentage (likely 100% or similar error code). Next, click the "Initialization" button. A pop-up dialog will ask you to confirm the reset. Click "OK" . If you want to make sure you have
Do you already have the , or do you need help finding instructions on where to safely acquire it?
Every Epson inkjet printer, including the XP 225, uses a built-in maintenance box or absorbent pads to capture excess ink purged during cleaning cycles. When you run a head cleaning, power cleaning, or normal printing, some ink is pushed through the print head to prevent clogs. This “waste ink” drips into foam pads inside the printer.