Psa Xs Evolution Drivers — Actia

: It is important to distinguish between the Windows driver (which lets your PC see the device) and the VCI firmware (the software inside the device). DiagBox often attempts to update the firmware automatically when it first connects to the interface. Identifying Your Hardware

⚠️ The XS Evolution was originally designed for 32-bit Windows XP. While DiagBox runs on 64-bit systems, it often does so via a Virtual Machine (VM). If using a VM, ensure you "Pass Through" the USB device from the host settings to the guest OS. Final Maintenance Tips

can communicate with the car's ECU to read fault codes, view live data, and program keys. Driver Installation & Official Sources

Product description (one sentence) High-performance Actia PSA XS Evolution drivers providing reliable CAN, K-Line and diagnostic interface support for PSA vehicles — optimized for fast flashing, accurate ECU communication, and cross-platform compatibility. actia psa xs evolution drivers

To help find the exact driver package or configuration tool you need, tell me: What or Lexia are you trying to run?

Are you setting this up for use with , or are you using a different diagnostic platform? Support - ACTIA IME

The standard directory is usually: C:\AWRoot\bin\fi\Driver\ or C:\Program Files (x86)\ACTIA\ . : It is important to distinguish between the

Permanently disable integrity checks via the Command Prompt. Run CMD as Administrator and execute: bcdedit /set nointegritychecks on Reboot your PC and reinstall the driver. Device Disconnects Intermittently

Can run Diagbox v9.xx via virtual machines or standalone pre-activated patches, but driver installation requires manually disabling driver signature checks. Step-by-Step Driver Installation Guide

: Once installed, the interface should appear as an "ACTIA USB Devices" or similar entry without errors. Compatibility and System Requirements While DiagBox runs on 64-bit systems, it often

However, getting the hardware to communicate with your computer requires the correct driver installation. Because this tool relies on specific USB firmware communication, driver mismatches are the number one cause of connection failures.

: For full compatibility with DiagBox 7.xx, the firmware should typically be at version Device Status

Navigate to your Diagbox installation directory. The standard paths for the driver files are: C:\AWRoot\bin\fi\driver\ C:\APPLIC\L3\Driver\

, then connect the USB to the PC. Wait 5 seconds before launching the software. Firmware Mismatch